Pro Ultra Rig

The unique design of this all in one rig means that it is capable of being configured for filming in either Mirror Mode or Side by Side Mode. The rig can be switched between modes in a matter of minutes with no specialised tools required and it offers adjustment capabilities for fast camera alignment and lens changes.

The Pro Ultra Rig can carry most cameras without the need for adapter plates and cameras are mounted using either an Arri dovetail system or universal slotted plate using1/4" or 3/8" standard camera screws.

Mirror Mode uses a 50:50 beam splitter enclosed in a carbon fibre matte box. The vertically mounted camera can be adjusted on three axis for quick alignment of just about any camera and lens configuration. Side by Side mode allows for greater inter-axial distances to be achieved.

Pro Ultra Rig Specifications

Configuration	Mirror (Over Under) and Side by Side
Rig Control Unit - weight	Automated handheld 7" PC touch screen with Potentiometer controls.On Board or remote hardwire.
Rig – weight	13.2 kg
Beam Splitter and housing - weight	3.0 kg
Rig Control Unit - weight	2.3 kg
Rig width - Mirror Mode	40 cm
Rig length - Mirror Mode	33 cm
Rig height - Mirror Mode	40cm
Rig width - Side by Side Mode	68 cm
Rig length - Side by Side Mode	33 cm
Rig height - Side by Side Mode	12.5 cm
Max camera weight	2 x 12 kg
Camera Types	Most professional film and video cameras up to max weight
Camera Mount	Arri dovetail plate, or through centre slotted plate, either 3/8" or 1/4" screws
Lenses	In Mirror Mode can accommodate lens with physical length of up to 300mm
Rig Support	Rig can be mounted on tripod Dolly or crane (adaptor plates required for remote head mounting)
Rig Power Requirements	2 x 12 VDC V lock or Anton Bauer type batteries
Rig Control Power Requirements	1 x 12 VDC V lock or Anton Bauer type battery or 220 V AC
Inter- Axial adjustment in Mirror Mode	0 to 270 mm accurate to 0.1 mm
Inter- Axial Adjustment in Side by Side Mode	92mm to 360mm accurate to 0.1mm
Convergence Adjustment	0 to 5 degrees accurate to 0.05 degrees

3DRigs.com PO Box 71186 Bryanston 2021 South Africa. Sales Tel +27 82 880 1449